The new Oxobutton 2 monitors temperature, humidity and light and can be easily adapted to different applications thanks to extensive configuration options. It can be used as a button and as a room sensor.
Bell at reception, at doors to practices, administrative buildings, offices, warehouses for receiving goods etc.
Service request for catering services in restaurants, hotels and other service businesses.
Fire alarm in private buildings, at events or in public spaces.
Requesting medical help or assistance in care facilities, hospitals, private health care facilities. public administrations, etc.
Service requests in catering establishments. Ordering food, drinks, etc.
Manual triggering of technical malfunctions (defects, contamination)
Request for technical assistance (in public buildings, train stations, etc.)
Temperature with ±0.2 °C accuracy 0-50 degrees Celsius
Humidity with ±2 %RH accuracy
Highlight detection in a wide dynamic range of 18'000'000:1. Value range from 0-65536
Configuration of the hysteresis, i.e. the change value that triggers a transmission. Standard configuration: 0.5 °C and 5 %RH.
Configuration of up to six threshold values per sensor value. If the value is exceeded or not reached, a transmission is triggered.
Long-term monitoring of a room with a fixed sampling interval. For example, the data can be sent to the server once every hour.
Bistable e-ink display with 200x200 pixel resolution.
The display is high-contrast and reminiscent of paper. There are no light emissions, i.e. no LEDs light up at night. This makes the unit well suited for bedrooms, hotel rooms, theatres/cinemas, etc.
The high-quality glass cover is coated with an anti-grease alloy.
There is a button on the top. Three more buttons are on the side. With the middle button you can switch between the modes.
With these buttons, the unit can be adapted to different use cases.
Transmission takes place via the LoRaWan protocol. For firmware updates, the units can be connected to the smartphone or PC via Bluetooth.
The optimised hardware of the new Oxobutton has improved antenna performance by approx. 10dB compared to the previous model.
The button contains a CR2477 button cell. This battery has a charge of 1000mAh.
Compared to the previous model, this increases the battery power by 3.5 times.
The button can be attached to walls with double-sided adhesive tape.
No screws need to be loosened to change the battery.
Innovation projects are welcome.
The Oxobutton 2 can be adapted to individual needs both on the software side and on the hardware side.
Contact us now for a no-obligation initial consultation.